September 23, 2022
Additive Manufacturing Customized Machines (AMCM), an EOS Group company based in Starnberg, Germany, was founded five years ago to provide the market with bespoke industrial metal Additive ... Read more »
May 18, 2021
Launcher, a space technology company headquartered in Hawthorne, California, USA, has acquired the M 4K Additive Manufacturing machine from AMCM GmbH, an EOS Group company, based in Starnberg ... Read more »
June 8, 2020
Additive Manufacturing Customized Machines (AMCM), an EOS Group company based in Starnberg, Germany, has launched its AMCM M 4K-1 (single laser) and AMCM M 4K-4 (four laser) ... Read more »
March 30, 2023
The world’s largest and most powerful particle accelerator, the Large Hadron Collider (LHC) based at CERN, s being upgraded with additively manufactured tungsten modules that will enable physicists study ... Read more »
July 12, 2022
AMEXCI OY, the Finish subsidiary of AMEXCI established in 2021, has invested in its first Additive Manufacturing machine, an AMCM M 290-2 from AMCM GmbH, an EOS Group company. The Laser Beam ... Read more »
January 13, 2021
Sintavia LLC, Hollywood, Florida, USA, has acquired two new M4K-4 metal Additive Manufacturing machines from AMCM GmbH, an EOS Group company based in Starnberg, Germany ... Read more »
February 25, 2021
Orbex, a UK-based spaceflight company with headquarters, production and testing facilities in Scotland, and design and testing facilities in Denmark, has commissioned AMCM to build the largest industrial AM ... Read more »
November 30, 2021
EOS North America, Novi, Michigan, USA, has delivered and installed its 1,000th Additive Manufacturing machine in the North American market. The milestone AM machine ... Read more »
November 12, 2019
Launcher Inc., headquartered in Brooklyn, New York, USA, has scheduled the first full-scale test of its E-2 rocket engine for mid 202,0 after securing a $1.5 million award from the U.S. Air Force and taking delivery of the engine’s copper ... Read more »
April 21, 2023
CADS Additive GmbH, a provider of metal Additive Manufacturing software, based in Perg, Austria, reports it has used its Titan.Core build processor to successfully prepare the build data for a complex ... Read more »
May 11, 2022
EOS GmbH, headquartered in Krailling, Germany, has partnered with Hyperganic Group, a software company headquartered in Munich, Germany, to advance the design of Additive Manufacturing parts ... Read more »
April 26, 2022
Launcher, headquartered in Hawthorne, California, USA, reports that its additively manufactured E-2 liquid rocket engine has successfully demonstrated nominal thrust, pressure and oxidiser/fuel mixture ratio ... Read more »
April 4, 2022
Solukon Maschinenbau GmbH, Augsburg, Germany, reports that Launcher, headquartered in Hawthorne, California, USA, has acquired Solukon’s SFM-AT1000-S powder removal system for the post-processing ... Read more »
February 19, 2021
Solukon Maschinenbau GmbH, Augsburg, Germany, has added new features to its SFM-AT1000-S and SFM-AT800-S powder removal systems for additively manufactured parts. Both systems are based on Solukon’s SPR ... Read more »
In October 2020, New York City-based space technology company Launcher started testing its full-sized E-2 liquid rocket engine, designed to deliver the highest performance at the lowest cost for smaller space launch vehicles. That the E-2 features a one metre tall single-piece copper alloy Laser Beam Powder Bed Fusion (PBF-LB) combustion chamber is remarkable. What is even more impressive is the fact that Launcher, a company with less than twenty employees, achieved this in a short time frame and to a relatively modest budget. Metal AM magazine’s Nick Williams reports on the project and Launcher’s close collaboration with specialist PBF-LB machine builder AMCM GmbH. [First published in Metal AM Vol. 6 No. 4, Winter 2020] ... Read more »
February 19, 2021
Morf3D, an end-to-end provider of AM solutions located in El Segundo, California, USA, has acquired four additional quad-laser EOS M400-4 Additive Manufacturing machines, building on an announced ... Read more »
November 19, 2019
Metal AM covers the latest news live from the show floor at Formnext 2019, the world’s biggest Additive Manufacturing trade show. Check back regularly for updates from Day 1, November 19, direct from Frankfurt ... Read more »
December 12, 2019
The Additive Manufacturing Users Group (AMUG), headquartered in Milwaukee, Wisconsin, USA, has announced Dr Hans J Langer, founder and former CEO of EOS GmbH and now the CEO ... Read more »
November 21, 2019
Metal AM covers the latest news live from the show floor at Formnext 2019, the world’s biggest Additive Manufacturing trade show. Check back regularly for updates from Day 3, November 21, direct from Frankfurt ... Read more »
November 20, 2019
Metal AM covers the latest news live from the show floor at Formnext 2019, the world’s biggest Additive Manufacturing trade show. Check back regularly for updates from Day 2, November 20, direct from Frankfurt ... Read more »
| Download PDF |
Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:
Discover suppliers of these and more in our comprehensive advertisers’ index and buyer’s guide, available in the back of Metal AM magazine.
| Download PDF |
Join our community