6K Additive awarded five-Year metal powder purchase agreement with US Army

MaterialsNews
September 26, 2023

September 26, 2023

6K’s UniMelt plasma production system is capable of converting high-value metal scrap of numerous forms into metal powders for Additive Manufacturing (Courtesy 6K Additive)
6K’s UniMelt plasma production system is capable of converting high-value metal scrap of numerous forms into metal powders for Additive Manufacturing (Courtesy 6K Additive)

6K Additive, a division of 6K Inc. headquartered in Andover, Massachusetts, USA, has been awarded a five-year Blanket Purchase Agreement (BPA) from the Army Contracting Command. This BPA is said to support the US Army Development Command (DEVCOM) in their strategic high-performance metal powders initiatives. The award was obtained through a competitive source selection process.

This BPA enables increased research and development efforts for weapons at DEVCOM, as well as meeting the additional demand for manufacturing prototypes and small quantities for Low-Rate Initial Production (LRIP). The BPA can be utilised by entities at various locations, including Picatinny Arsenal in New Jersey, Benet Labs in New York, Adelphi Laboratories in Maryland, and Rock Island Arsenal in Illinois.

THE WORLD OF METAL AM TO YOUR INBOX
Subscribe to our weekly newsletter
Sign up

To produce the metal powders, 6K Additive will utilise their proprietary UniMelt microwave plasma platform. This technology allows 6K to source, process, and reclaim scrap components, shop scrap, and used powders, converting them into aerospace-grade metal powders.

Lieutenant Colonel Peter J Stambersky, USA Retired and Director of Federal Affairs at 6K, shared, “My experience from my service in the Army provides me with a unique perspective of the agreement. Clearly, there is a benefit to 6K Additive, but, more importantly, this agreement provides the US Army DEVCOM with access to critical materials for Additive Manufacturing derived from feedstock right here in the US. This agreement further establishes 6K Additive as a trusted partner for powder and as a source for reprocessing retired components from military aircraft and vehicles delivering a closed-loop, secure material supply to the US Army.”

The 6K UniMelt plasma production system is capable of converting various forms of high-value metal scrap into high-performance metal powders. These powders are used in Additive Manufacturing, Metal Injection Moulding, and other Powder Metallurgy production techniques. This system provides access to domestically sourced strategic metals and alloys like nickel and titanium, as well as refractory powders like C103 and tungsten, which are crucial for modern military missions.

The patented 6K Additive process cleans, prepares, and spheroidises scrap alloys, producing high-quality powders that are said to outperform atomisation technologies. This process ensures a secure and traceable domestic supply of critical materials for the US military, while eliminating performance issues that may arise from questionable foreign sourcing.

www.6kinc.com

Download Metal AM magazine
MaterialsNews
September 26, 2023

About Metal Additive Manufacturing magazine

Metal AM magazine, published quarterly in digital and print formats, is read by a rapidly expanding international audience.

Our audience includes component manufacturers, end-users, materials and equipment suppliers, analysts, researchers and more.

In addition to providing extensive industry news coverage, Metal AM magazine is known for exclusive, in-depth articles and technical reports.

Our focus is the entire metal AM process from design to application.

Each issue is available as an easy-to-navigate digital edition and a high-quality print publication.

In the latest issue of Metal AM magazine

Download PDF
 

Extensive AM industry news coverage, as well as the following exclusive deep-dive articles:

  • Fly-by-wire: How Additive Manufacturing took to the skies with Norsk Titanium
  • Dynamic beam shaping: Unlocking productivity for cost-effective Laser Beam Powder Bed Fusion
  • Enabling the fusion energy revolution: Mastering tungsten with PBF-EB Additive Manufacturing
  • Patents and Additive Manufacturing: What insights can mining PBF-EB data reveal about the industry and the technology?
  • Additive Manufacturing for Semiconductor Capital Equipment: Unlocking critical supply chains
  • Can Additive Manufacturing lower the carbon footprint of parts for the energy and maritime industries?
  • Inspect Additive Manufacturing, stop monitoring: Phase3D’s unit-based, in-process inspection solution for powder bed AM

The world of metal AM to your inbox

Don't miss any new issue of Metal AM magazine, and get the latest industry news. Sign up to our twice weekly newsletter.

Sign up

Looking for AM machines, metal powders or part manufacturing services?

Discover suppliers of these and more in our comprehensive advertisers’ index and buyer’s guide, available in the back of Metal AM magazine.

  • AM machines
  • Process monitoring & calibration
  • Heat treatment & sintering
  • HIP systems & services
  • Pre- & post-processing technology
  • Powders, powder production and analysis
  • Part manufacturers
  • Consulting, training & market data
View online

Discover our magazine archive…

The free to access Metal Additive Manufacturing magazine archive offers unparalleled insight into the world of metal Additive Manufacturing from a commercial and technological perspective through:

  • Reports on visits to leading metal AM part manufacturers and industry suppliers
  • Articles on technology and application trends
  • Information on materials developments
  • Reviews of key technical presentations from the international conference circuit
  • International industry news

All past issues are available to download as free PDFs or view in your browser.

Browse the archive

Share via
Copy link
Powered by Social Snap